Nano Splasher
Specifically designed for above-ground pools and spas, the Nano Splasher, fully titanium, ‘user friendly’ heater has all the benefits of superior performance, 100% efficiency, and most importantly, maximum safety for peace of mind. The Nano Splasher is the perfect solution for heating pools with a flow rate as low as 1m3/h and as high as 17m3/h.
Product description
Features & Benefits
- Available as 2-kW & 3-kW “Plug & Play”
- Easy installation, fully equipped and pre-wired with UK or EU plug
- Robust, durable construction
- Ultra-reliable flow switch allows safe operation
- Supplied with temperature thermostat and overheating sensor
- Compact, durable design
- Analog control with 1.2°C differential
- Titanium flow tube and titanium heating element
- Can be floor or vertically wall mounted
- Vortex, long life, stay clean heating element technology
- 100% efficiency throughout the product life
- Silent operation
- Supplied with water connections for flexible or rigid piping
Kirami Tub Fitting Requirements
To use the Nano Splasher with a Kirami tub, the unit requires an in feed of water form the bathing area. If you have a filter pump installed the Nano Splasher will typically fit after the filter but before the water returns to the bathing area.
If you do not have a filter you will need to take a feed of water from either the drain outlet or between the tub and heater using a Middle Water Outlet Kit. The feed of water is pumped either by an MF250 or CF23 filter pump through the Nano Splasher and back into the the bathing area via a new water outlet ‘lead through’ which is part of the Filter Connection Kit
Please note, the Nano Splasher must be installed under cover i.e. not open to the elements. If it is exposed to rain and sun the warranty will be void.
Above items in bold will be required in addition to the Nano Splasher to make the Nano Splasher work.
