If this is the hot tub for you, proceed to customise your purchase - choose the outer and inner finishes along with adding LED lights to your tub (where possible).
Product description
A new addition to the premium product category is the Tiny Flow hot tub. The Tiny Flow is an oval-shaped and sleek little hot tub, equipped with an efficient filtration system and electric heater to maintain the set temperature. The pleasant Water Jets water therapy jets at both ends of the pool, at the seats, gently caress your back muscles and skin, making you feel heavenly relaxed. In this small pool, as in all other Kirami hot tubs, you can enjoy the closeness of nature without the changing colourful lights and disturbing loud noises.
This easy to clean, compact hot tub with an inner basin made of plastic comes with two shaped seats and is suitable for use by one or two people. The hot tub's light weight and small size make it easy to place it in small yards as well as on terraces. Thanks to Tiny Flow's quick heating and small water capacity, even busy weekday evenings can turn into luxurious moments. Safe, factory-installed LED lighting is available as an accessory for the the tub, which brings out the its own colour and creates a magical atmosphere for spa sessions later in the season when the nights begin to draw in.
The Water Jets flow system (water therapy jets) consists of an electric heater, a filtration system and six adjustable Water Jets massage jets that massage the back of the bather by pressing a button. The hot tub is equipped with two suction valves with a protective grating, combined with a filter system, and a washable and replaceable cartridge filter. The electric heater operates while the filtration system is running and can be used without the water therapy jets. The electric heating system has a 2 kW resistor with an adjustable thermostat. The Water Jets flow system has a gross power of 2 kW and a net power of 2 kW transferred to the water. The reference heating time is approximately 1,5-2°C/hour, after which the system maintains a constant water temperature. It takes about 24 hours to warm up from cold water to bath temperature, depending on the conditions. An insulating hood is supplied to put over the filter system to protect the unit in different weather conditions. The electric heater has a standard button on the base for starting the jets. If desired, the button can be moved, for example, to a Family staircase, that is available as an accessory, or to any other position of your choice.
The heat-treated pine used in the outer shell is a Finnish alternative for dark-coloured imported wood. ThermoWood is a high-quality, long-lasting material with a warm brown colour that maintains its shape well. Light grey is velvety smooth and delicate dotted inside colour. The soft, vibrant grey of the interior is always timeless and elegant, and it blends in beautifully with the environment.
The barrel diameter is 170 cm and water volume 615 litres. It is suitable for 1-2 people. The dry weight of the hot tub is 145 kg. The gross heat output of the WaterJetsFlowSystem2kW stove is 2 kW and the net heat output transferred to the water is 2 kW.
It is important with all hot tubs to be placed on an even surface that can bear the whole weight of the tub once full of water. This foundation must be level, which can be achieved with various aggregates such gravel, stone and concrete.
When placing the Premium Tiny Flow consider possible places to drain your bathing water too. If needed you can lead off the water with an outlet hose.
During wintertime, when the tub is not in use please ensure the tub is emptied of all water. If water is left in the tub during winter there is a risk of freezing temperatures, which can cause your bathing water to freeze and expand which can cause the drainage pipe to crack.
The bottom plugs and exhaust valves need to be left open so that any water collected to the tub will discharge.
If you are wanting to use your tub over a couple of days during the wintery season you must try to maintain sufficient heat in your water to avoid it freezing. This may mean using an insulated cover and monitoring the water temperature to see if you need to use your heater to prevent the water temperature dropping to freezing.
In order to help keep the hot tub clean you can buy a model-specific cover. You can also take care of the cleanliness and hygiene of the tub by washing and drying it carefully and often.
Washing can be done, with a mild disinfectant. Kirami sells chemicals that can be used for keeping the water clean. When using chemicals, the pH of the water should always be monitored and kept in the given limits, i.e. 7.0-7.6. to test your pH levels you require litmus strips. They are available with a water treatment pack from Kirami.
If this is the hot tub for you, proceed to customise your purchase - choose the outer and inner finishes along with adding LED lights to your tub (where possible).
Get in touch with any questions you may have about this particular product.
Learn more / Guides
Proud to supply over 500 businesses in the UK
We are proud to be working with many businesses who buy Kirami wood-fired hot tubs and saunas from us.
View locations
Create, save and purchase customised hot tubs
Choose your hot tub, outer and inner finishes and then add accessories to create your perfect package.
Build Your Hot Tub
From the factory direct to your garden
Purchasing a hot tub or sauna is as easy as the process for having it delivered and installed anywhere across the UK.
Installing your tub--480.png "CULT External Heater 22kW")
